- Slider de alta calidad
- Patas opcionales
- Desde 35 cm a 1 metro de perfil
- Carro con 8 rodamientos
- Ultaligero
- Roscas de 1/4" y 3/8" para montar sobre tripodes
- Soporta hasta 12 kg de carga

- Slider de alta calidad
- Patas opcionales
- Desde 35 cm a 1 metro de perfil
- Carro con 8 rodamientos
- Ultaligero
- Roscas de 1/4" y 3/8" para montar sobre tripodes
- Soporta hasta 12 kg de carga

- Slider de alta calidad
- Patas opcionales
- Desde 35 cm a 1 metro de perfil
- Carro con 8 rodamientos
- Ultaligero
- Roscas de 1/4" y 3/8" para montar sobre tripodes
- Soporta hasta 12 kg de carga

- Speed
- Forward 30-60 Km/h
- Backwards 20 km/h
- Motors
- 8 poles 400 Kw 56113 brushless motors
- Controller 2,4 GHz 3 channel
- Net weight 17 Kg
- Compatible with all Came-TV gimbals

Montura de lente universal

Todo en una pieza de aluminio
2 Cold shoe
Pinza (Clamp) para cables
Facil montaje de Bateria y tarjetas
Muchos puntos de anclaje
Ultraligero soporte de lentes

Todo en una pieza de aluminio
Cold shoe
Pinza (Clamp) para cables
Facil montaje de Bateria y tarjetas
Muchos puntos de anclaje

Todo en una pieza de aluminio
2 Cold shoe
Pinza (Clamp) para cables
Facil montaje de Bateria y tarjetas
Muchos puntos de anclaje

Todo en una pieza de aluminio
Cold shoe
Pinza (Clamp) para cables
Facil montaje de Bateria y tarjetas
Muchos puntos de anclaje

- 3-axis motorized gimbals
- Hasta 5 kg de carga lb
- Pre-calibrated 32-bit Alexmos control board
- Lock, Follow, and Commixture Modes
- Joystick for pan, tilt, and mode control
- Top handle
- Quick-release plate
- 15mm rod clamp below camera plate
- 1/4"-20 and 3/8"-16 mounting threads on top of camera cage
- New Lipo batera system until 12 hours lifetime
- Balance stand and hard case included

- 3-axis motorized gimbals
- Supports loads up to 3 kgr
. Pre-calibrated 32-bit Alexmos control board
. Lock, Follow, and Commixture Modes
- Joystick wireless for pan, tilt, and mode control
- Came Elastix

- 3-axis motorized gimbals
- Max load: 3kg (6.6 lbs)
- Pre-calibrated 32-bit Alexmos control board
- Lock, Follow, and Commixture Modes
- Wireless Joystick for pan, tilt, and mode control
- Side handles
- Top handle
. Quick-release plate
- Monitor bracket
- Battery and charger
- Net weight: 2.9kg(6 lbs) Gimbal+Battery
- Net weight: 2.9kg(6 lbs) Gimbal+Battery
- Total weight: 6.8kg (15 lbs) The Entire Argo Gimbal Including The Hard-Case

- Resolucion 4K
. Monturas E
- Sensor CMOS Exmor® de 12,2 MP full frame
- Sensor 35 mm
. Monitor small hd 502
- 1080p Full HD Resolution
- SDI/HDMI Cross Conversion
- Incredibly Light and Durable
- 5 Pulgadas

- Monitor Small HD 502
- SDI/HDMI Cross Conversion
- Canon Baterry Kit con cargador y dos baterias LP-E6
- Maleta de transporte
- Funda de neopreno para el monitor
- Protector acrylico para la pantalla
- 1,5 ft cable Mini HDMI a HDMI
- 3 ft Cable SDI
- Hot shoe mount
- Balleta de limpieza

- 1080p Full HD Resolution
- SDI/HDMI Cross Conversion
- Incredibly Light and Durable
- 5 Pulgadas

-IPS panel 178° wide viewing angles,
-High resolution: 1280×800,
-High brightness: 400cd/㎡,
-High contrast: 800:1,
-Faster response time,
-Wide voltage: DC 7-24V,
-Firm & portable design,
-POP-UP shortcut menu,
-Shutter shortcut button
-Compatible Balckmagic cameras

-High resolution: 1024×600
-Wide viewing angles
-High contrast: 800:1
-5D-II camera mode, Flexible folding sunshade,
-Wide voltage: DC 7-24V,

- HD Video Transmission
- Full-HD 1080p/60 with a range of up to 700 feet
- Weighs 12 oz/340g (without antennas)

-100% CNC machined aluminum construction
-Compact, form fitting design.
-Made specifically to fit the GH4 Lumix Camera
-Full access to all of the camera's controls, buttons, battery and memory card door
-Plenty of 1/4-20" and 3/8-16” threads on the top and both sides of the cage
-Weighs 7.8 oz
-HDMI Cable clamp included

- Gimbal para cámaras hasta 2,5 kg
- 3 ejes de estabilización
- 5 profile programables
- Bluetooth embebido para maneja app desde móvil

-Tamaño efectivo del sensor - 12,48 mm x 7,02 mm
-Resolución efectiva - 1920 x 1080
-Velocidad de fotograbas - 23.98p, 24p, 25p, 29.97p, 30p
-Resoluciones de rodaje - CinemaDNG RAW sin pérdida de información y Apple ProRes 422 (HQ) a 1920 x 1080

-Upper handle
-Cage
-Handles
-Maleta de aluminio

-96 watt-hours, 14.8V 6.5Ah
-Rechargeable Gold Mount Li-Ion battery
-Maximum discharge output 8A / 90W
-Battery software can be updated externally
-Compatible with Anton Bauer battery communication system
-Charges on Anton Bauer Li-Ion chargers.
-130 x 86 x 52mm / 0.76kg

-50 watt-hours, 14.4V 3Ah
-Rechargeable V-Mount Ni-MH battery
-4 LED capacity indicator
-Charges on PAG or Sony V-Mount chargers
-130 x 86 x 47mm / 0.88kg

-96 watt-hours, 14.8V 6.5Ah
-Rechargeable V-Mount Li-Ion battery
-Smaller design and higher energy density than any other comparable V-Mount Li-Ion battery
-Auto-compatible with multiple camera data systems and in-viewfinder capacity displays (Sony, Red, etc)
-5 LED run-time and capacity indicator
-33 x 84 x 50mm / 0.73kg

- Alimentador para dos baterias V Mount
- AC In 100V/240V 50/60 Hz
- Charging Output DC 14V-20V 2,5A a 5A
- DC Output 15V - 4,5A
- Tamaño 228x140x86 mm
- Peso 1,1 Kg

- Tamaño 7 pulgadas
- Resolución 1024x600
- Resolución maxima soportado 1920x1440
- Contraste 700:1
- Entradas HDMI/SDI
- Salidas jack para cascos, HDMI/SDI

-7.7-inch monitor
-1280x800 resolution
-8-bit color depth
-HDMI, Component, Composite
-Focus Assist, DSLR Scale, Frame Guides and more...
-OLED Display Technology

-7-inch monitor
-1280x800 resolution
-8-bit color depth
-HDMI, Component, Composite
-Focus Assist, DSLR Scale, Frame Guides and more...

-Includes the New D|Focus v4
-Works great with Cine Lens
-NEW D|Rails BMCC Baseplate with 8" rods (upgradable to 12" rods)
-D|Gear
-NOTE: Camera and D|Matte NOT included

-100% CNC machined aluminum construction
-Compact, form fitting design.
-Made specifically to fit the Blackmagic Pocket Cinema Camera like a glov
-Full access to all of the camera's controls, buttons, battery and memory card door
-Plenty of 1/4-20" and 3/8-16” threads on the top and both sides of the cage
-Weighs 7.8 oz
-HDMI Cable clamp included

- ES-30 Arm
- ESV-20 load-distributing vest
- EG-2 Sled
- Peso 6,1 kg
- Carga maxima 8 kg
- Carga cámara maxima 4 kg
- Grantia 2 años

-Steadycam de brazo doble
-Chaleco × 1
-Dual-Brazo × 1
-I-Type Stabilizer ×1

-DSLR Optical Viewfinder
-Fits 3.2" LCD Screens
-2.5x Focusable Magnification
-4.75 Diopter Correction
-For Nearsighted Shooters

-6.2-inch LCD display
-Attaches directly to DSLR or HD video cameras
-Resolución - 800 x 480

-Batería universal para camcordersbr /> -Cámaras de mano y cámaras DSLR y Blackmagic camerabr /> Incluye 1 cable D-TAP a elegir y cargador rápido (2 h).br />

-Material: Aluminum construction, powder coated in black
-Weight: 12kg without weights
-Maximum load capacity: 5kg
-Water level: YES
-Lift height range: (upper and lower position) 230cm
-Overall length: of the crane 225cm
-Arm length: from the center of rotation: 165cm

-800mm rail
-AF-8 port
-AF-3-HSK PRO Feet
-Cart with a 3/8 " threaded hole and a standard level
-AF-11SL reduction 1/4 "- 3/8" mandrel
-AF-12SL reduction 3/8 " mandrel
-Standstill brake
-Hex key
-User manual

-600mm rail
-AF-3-S PRO Feet
-Cart with 3/8'' threaded hole and a level
-AF-11 SL reduction 1/4"-3/8" mandrel
-AF-12 SL reduction 3/8" mandrel
-Standstill brake
-Hex key
-User manual

-V4 follow focus
-D|Gear
-Camera not included

-Single rail, all aluminum, CNC machined 15mm rod mount
-Smooth, damped motion (amount of damping is user adjustable)
-End user adjustable backlash
-A ratcheting thumbscrew for tightening onto rails

-New, all aluminum, CNC machined, single rod clamp with gearbox angle adjustment
-New removable marking disc
-Compatible with industry standard 15 mm Rods
-Compatible with all industry standard 32 pitch (0.8 mod) lens gears
-Industry standard accessory port on the knob for whips and cranks
-Reversible gearbox – Set it up on either side of your camera

-Monitor con control de follow focus incluido
- Incluye Follow Focus + Monitor

-Deslizador Electrico
-Opciones 1 o 1,5 m

-Monitor de 7"
-Scale up1920x1080
-contraste 500:1
-Entradas - HDMI, VGA, AV1/AV2
-Standbye current 50mA

Kit de Rig DSLR Incluye Follow Focus, Matebox, Follow Focus + Soporte

Steadycam de brazo simple Carga de 1-5 kg)

-Mini Estabilizador Elfin
-Muy ligero - Alluminio

-Follow Focus Wireless

- Sistema inalámbrico de 4 canales modulares para la banda UHF.
- Incorpora 4 micrófonos de mano (HM 100) con identificador de color.

Dimensiones: 565 x 374 x 241mm

Dimensiones (An x Al x Pr): 605 x 580 x 1020 mm.

- Consola DMX de 192 canales.
- 30 bancos de memoria con 8 escenas programables cada uno.
- Joystick para movimientos Pan/Tilt configurable.

- Mesa de mezcla autoamplificada con 16 entradas Mic/Line.
- Potencia de salida: 2 x 350 W @ 4Ω.

- Caja acústica activa moldeada en plástico ABS.
- Reproductor USB/SD para la reproducción de dispositivos externos (pendrive USB, tarjeta SD).
- Recomendada para aplicaciones de touring.

- 1 x 10'' (Bass) + 1 x 1'' driver.
- Potencia: 150 W.

- Potencia de salida: 60 W.
- 6 entradas de señal de niveles de micro y auxiliar.