Blueshape Power Station PWS2-14 para 2 baterías - BAJO PETICIÓN
-12552-p.jpg?v=7ed2d6d2-22ed-4dee-8f47-551b4e434c16)
-12552-p.jpg?v=7ed2d6d2-22ed-4dee-8f47-551b4e434c16)
-12552-p.jpg?v=7ed2d6d2-22ed-4dee-8f47-551b4e434c16)
-12552-p.jpg?v=7ed2d6d2-22ed-4dee-8f47-551b4e434c16)
-Power Station para 2 baterías.
-Salidas sólo a 14V.
-Bajo petición.
-Salidas sólo a 14V.
-Bajo petición.
Código de producto: PWS2-14
Marca: Blueshape
Producto Disponible
744,95€
2 V-lock battery Power Station
Specifications:
- Input: 1 to 2 installable batteries, hot swappable
- Output:
1x regulated 28V, max 280W
- Display: 3 LEDs gauge per battery
- Size: 250 x 145 x 80mm (9.84" x 5.51" x 3.15")
- Weight: 0.75Kg (1.55lbs)
The BLUESHAPE power station concept is a convenient system to integrate the power of multiple V-lock batteries into a unique source that can be tapped anywhere anytime in a simultaneous dual voltage output.
Due to the highly efficient internal electronics, over the 90% when delivering higher loads, the system remains cool even after hours of operation for a safe and prolonged system reliability.
Depending on which batteries are installed, the dual system can supply power as follows:
Installing 1x BV batteries, HD models (high drain):
- up to 140W on the 14V output
- up to 140W on the 14V output
Batteries are hot-swappable to keep providing constant power without interruption, even when a battery becomes empty (if the remaining battery is capable to compensate and deliver more current)..
An array of LEDs is used to indicate the level of current delivered instantaneously by each battery, giving the user the indication of the load each battery is withstanding:
- Lower LEDs: blinks for current delivered up to 1.5A, steady for current up to 3A
- Middle LEDs: blinks for current delivered up to 4.5A, steady for current up to 6A
- Upper LEDs: blinks for current delivered up to 8A, steady for current over 8A
 |
Practical handle |
 |
LED Dislay showing the actual current output delivered by each battery. 3 LEDs describe a 0~10A scale |
 |
Battery bay #1 |
 |
Battery bay #2 |
 |
14V outlet (max 140W) over a 4 pin XLR socket |
 |
28V outlet (max 280W) over a 3 pin XLR socket |
 |
Illuminated ON/OFF switch |
 |
Fan vent |
 |
Rotating foot for improved stability: to open when batteries are installed, to close to stow PWS2 |
 |
Data socket for computer testing, debugging and calibration |
