Inicio > MARCAS > BLUESHAPE > POWER STATIONS

Blueshape Power Station PWS2-28 para 2 baterías - BAJO PEDIDO

Blueshape Power Station PWS2-28 para 2 baterías - BAJO PEDIDO
Blueshape Power Station PWS2-28 para 2 baterías - BAJO PEDIDO Blueshape Power Station PWS2-28 para 2 baterías - BAJO PEDIDO Blueshape Power Station PWS2-28 para 2 baterías - BAJO PEDIDO Blueshape Power Station PWS2-28 para 2 baterías - BAJO PEDIDO
-Power Station para 2 baterías.
-Salidas sólo a 28V.
-Bajo petición.
Código de producto: PWS2-28
Marca: Blueshape
Producto Disponible

749,95
Bookmark and Share
Más Información
Power Station para 2 baterías. Cambio en caliente. Salidas sólo a 28V. 3 LED indicadores por batería. Peso: 0,7 Kg. Bajo petición.  
 
2 V-lock battery Power Station

Specifications:

  • Input: 1 to 2 installable batteries, hot swappable
  • Output:
    1x regulated 28V, max 280W
     
  • Display: 3 LEDs gauge per battery
  • Size: 250 x 145 x 80mm (9.84" x 5.51" x 3.15")
  • Weight: 0.75Kg (1.55lbs)


The BLUESHAPE power station concept is a convenient system to integrate the power of multiple V-lock batteries into a unique source that can be tapped anywhere anytime in a simultaneous dual voltage output.

Due to the highly efficient internal electronics, over the 90% when delivering higher loads, the system remains cool even after hours of operation for a safe and prolonged system reliability.
Depending on which batteries are installed, the dual system can supply power as follows:

Installing 2x BV batteries, HD models (high drain):
  • up tp 280W on the 28V output
Installing 2x standard BV batteries (normal discharge):
  • up tp 240W on the 28V output

Batteries are hot-swappable to keep providing constant power without interruption, even when a battery becomes empty (if the remaining battery is capable to compensate and deliver more current)..

An array of LEDs is used to indicate the level of current delivered instantaneously by each battery, giving the user the indication of the load each battery is withstanding:

  • Lower LEDs: blinks for current delivered up to 1.5A, steady for current up to 3A
  • Middle LEDs: blinks for current delivered up to 4.5A, steady for current up to 6A
  • Upper LEDs: blinks for current delivered up to 8A, steady for current over 8A

Practical handle
LED Dislay showing the actual current output delivered by each battery. 3 LEDs describe a 0~10A scale
Battery bay #1  
Battery bay #2
14V outlet (max 140W) over a 4 pin XLR socket
28V outlet (max 280W) over a 3 pin XLR socket
Illuminated ON/OFF switch
Fan vent
Rotating foot for improved stability: to open when batteries are installed, to close to stow PWS2
Data socket for computer testing, debugging and calibration
Opinión de Cliente
Pay with PayPalPay with VisaPay with Visa ElectronPay with MastercardPay with American ExpressPay with Maestro