EIMAGE ES150 EXTENDABLE BELT-DRIVEN SLIDER (80/150CM)
- Converts from 80cm Slider to 150cm Slider
- Includes Extra Outrigger Legs for Center Support when at Full Length
- Latch and Hook Connection Style Eliminates Give at Section Junctions
- Transport Weight of Full Kit: 13.4 lb.
- Short Version Travel Distance: 23.5″
- Long Travel Distance: 51″
- Includes Long and Short Drive Belts (S3M Type, 10mm Wide)
The ES150 is an extendable slider from E-Image. The ES150 comes in a set of parts: an 80cm
slider with a hand wheel, drive belt, and legs, and an extension piece with an extra set of legs and
a longer drive belt to accommodate the expanded travel distance of 150cm.
To change the slider length, remove the shorter drive belt and unhook the end piece. Attach the
extension, then re-attach the end piece to the extension. Next, thread the longer drive belt through
from the carriage, through the end pieces, and back around to the carriage. Tighten the belt, and the
slider is now nearly twice as long as before!
The ES150 can mount to 1/4-20 and 3/8-16 screws on the center cheese plate when in 80cm mode,
and can mount to 1/4-20 and 3/8-16 screws or to a 5/8″ baby pin stand mount on the end pieces in any
configuration. The carriage has a 3/8-16 screw for mounting large cameras or fluid video tripod heads
with a flat base.
The end piece is compatible with both the hand wheel (included) or the E-Image Motor1 (not included).
Shipping Weight (lbs): 15
Shipping Dimensions (in): 10 x 10 x 40
LA CAJA INCLUYE:
1 x 117.5" S3M Drive Belt
1 x 2mm Allen Wrench (For Handwheel)
1 x 3mm Allen Wrench (For Drive Belt)
1 x 61" S3M Drive Belt
1 x Dolly Carriage
1 x End Cap W/ Handwheel Mount
1 x Expansion Rail
1 x Handwheel
1 x Handwheel Handle
1 x Rail Section W/ End Cap And Cheese Plate
1 x Travel Bag W/ Shoulder Strap
3 x Outrigger Leg Sets
Quick Start Guide: ES150 Downloadable PDF
Data Sheet: ES150 Downloadable PDF
Bubble Level: Installed on Carriage
Build Material: Aluminum and Carbon Fiber
Dimensions: Total Length (Short): 32.8"/~83.5cm | Total Length (Long): 60.25"/~153.5cm | Short Drive Belt: 61"/~155.5cm | Long Drive Belt: 117.5"/~300cm | Expansion Rail Length: 28-3/8"
Fixture Weight: Full Kit (w/ Bag): 13.4 lb. | Short Slider: 8.3 lb. | Long Version: 10.3 lb.
Gearing: S3M Belt: 3mm Gear Pitch x 10mm Wide | 2.2mm Thick, Tooth Height 1.14mm
Motor Type: E-Image Motor1 Compatible (Not Included)
Mounting Points: On Carriage: 3/8"-16 | End Caps: 1/4"-20, 3/8"-16, 5/8" Baby Pin | Cheese Plate: 1/4"-20 and 3/8"-16
Payload: Recommended Max 15 lb.
Travel Distance: Short Version: 23.5"/~60cm | Long Version: 51"/~130cm
UPC Code: 847983025053