EIMAGE MK07 4×4 CARBON FIBER SWING-AWAY MATTE BOX
-18192-p.png?v=7ed2d6d2-22ed-4dee-8f47-551b4e434c16)
-18192-p.png?v=7ed2d6d2-22ed-4dee-8f47-551b4e434c16)
-18192-p.png?v=7ed2d6d2-22ed-4dee-8f47-551b4e434c16)
Model: MK07
- Fits Lenses with 85mm Max Front Outer Diameter
- Carbon Fiber and Aluminum Construction
- Rotating 4 x 4 Filter Stage
- 15mm Rod Mounting
- Swing-Away Design
- Adjustable Height Filter Slots
- Top & Side Flags
- Removable Rubber Light Holders for Standard 8.8cm or 12.8cm Lens
The E-Image MK07 4×4 Rod-Mounted Swing-Away Matte Box is a 4 x 4 matte box that fits lenses
with a maximum front outer diameter of 85mm. It features a carbon fiber and aluminum construction
that makes it lightweight. It features a rear rotating 4 x 4 filter stage and mounts onto lightweight 15mm
rods. The matte box incorporates a swing-away design for rapid lens changes. The included 4 x 4 filter
trays can slide in the stages, allowing you to adjust their height. The included removable top and side flags
can be precisely set to block stray light from flaring your lens. The included anti-reflection rings protect your
image by blocking stray light behind the camera bouncing off of filters in the matte box and flaring your image.
In addition, the interior of the matte box is finished with a black anti-reflective coating to reduce reflection off
the matte box back onto filters.
Lightweight Construction
The matte box itself is made out of carbon fiber, with aluminum used for the support structure. This
provides a lightweight yet sturdy unit that is appropriate for shooting hand-held or with a stabilizer rig
when every ounce counts.
Swing-Away Design
The swing-away design allows you to quickly move the matte box out of the way to check or change
lenses, without having to remove the matte box from the support rods. This way you don’t have to hand
off the matte box to someone else, hold it under an arm or between your knees, or hang it under the rods
while you work, greatly speeding your workflow and reducing the chance of dropping the matte box or
having a filter tray fall out.
Rotating 4 x 4 Filter Tray
The matte box features an independently rotating 4 x 4 filter tray; this allows you to rotate the rear filter
stage, such as a polarizer, for creative effect. The filter stage rotates 180° and features a tray locking knob,
which allows you to adjust the height of the filter and lock it in place. This is a useful feature when using
graduated filters in your matte box. The filter trays feature a center detent, so you can easily position them
exactly in the middle.
Top & Side Flags
- The removable top and side flags provide you additional flare control and attach to the matte box This allows you to precisely set your flags to match the edge of the frame for different lenses and tighten them in place so that they don’t move during the shot.
- Each side flag is made from two pieces with a pivot point that allows you to pivot the outer flap approximately 45° providing the additional height so that the side flags can butt up against the top flag when it is in a raised position. The outer flap of the side flags run in a track, and a locking thumb nut allows you to lock the side flags pivot adjustment.
Shipping Weight (lbs): 4.4
Shipping Dimensions (in): 20.47 x 11.0 x 8.7
LA CAJA INCLUYE:
1x Carbon Fiber Matte Box
Brand: E-Image
Build Material: Carbon Fiber and Aluminum
Compatible System: 4x4 Filters | 15mm Rod | Lenses Up To 85mm Outer Diameter
UPC Code: 6948229843807
