Inicio > MARCAS > BeStablecom > Brushless Gimbals

Estabilizador de 3 ejes BeStableCam - SteadyGim4 3-axis Camera Stabilizer Aereo o Manual

- Weight: 1100g (batteries and handheld kit not included)
- Six receiver channels available
- Supported cameras: Panasonic GH2 GH3 GH4
- Supported lens: 7-14mm 12mm 14mm, and other lens with suitable weight
- Built-in functions: Bluetooth wireless Module
- Control Channel: Six receiver channels available
Código de producto: GAM4
Marca: BESTABLECAM
Producto Disponible

2.315,20
Opción Kit de mano
Bookmark and Share
Más Información

Details

The BeStableCam SteadyGim4 3-axis brushless gimba 3-axis brushless gimbal has been designed and tuned to be used with a Panasonic GH2,3,4 or equivalent camera.

The BeStableCam SteadyGim is robust in construction, it has several holes and slides in order to be balanced with near any other camera of the dimensions of the Panasonic GH2,3,4(or equivalent).

The BeStableCam SteadyGim4 Pan motor come with a slip ring (or rotating electrical collector) ensures the connections of the video and an optional remote shutter, eliminating the hanging cables and allowing the Nick axle to move freely (depending on the size of the lens used).

The BeStableCam SteadyGim4 already equipped with a 3-axis stabilization board, The BeStableCam SteadyGim4 is ready to use with your Panasonic GH2,3,4(or equivalent).

The BeStableCam SteadyGim4 can also be used as a Steadycam, with an optional handle.

The BeStableCam SteadyGim4 has a  large upper tray allows its mounting under any frame or support.

Delivered with a transportation case.

 

Technical Description

 

Product name: BeStableCam – SteadyGim4

Product type:  3-axis brushless gimbal

Product weight: 1100g (batteries and handheld kit not included)

Shooting modes: Six receiver channels available (Product does not include a receiver)

Supported cameras: Panasonic GH2 GH3 GH4

Supported lens: 7-14mm  12mm  14mm, and other lens with suitable weight

Built-in functions: Bluetooth wireless Module

Control Channel: Six receiver channels available (Product does not include a receiver)

Rotation angles: Pitch axis control angle:  360 degrees

                             Roll axis  control angle:  160 degrees

                             Yaw axis  control angle:  360 degrees

Operating Voltage:  24V(6S)

Other features: High strength,light in weight

Features:

- 3 axis stabilization powered by quiet brushless motors.
- Simple construction of anodized aluminum and carbon fiber.
- Handles cameras up to around 1.5 kg. (We are still performing tests to determine if the payload can be increased further)
- Allows for panning and control of tilt.
- Perfect for solo operations.
- It is sold complete and ready to use* with one battery and charger.
- Completely autonomous
- Video signal and shutter cables conducted through the slip ring

Movements controlled via your radio control or through the Flight-Ctrl:
  
  *Panoramic (360°)
  *Roll
  *Tilt

- Two operation modes selectable by the operator:

  *Standard (or Lock mode)
  *Follow mode The operation mode is selected through your radiocontrol, from a two position switch

- Can be used on your multirotor drone, airplane, helicopter etc, but also as handheld(handle available separately)
- 3 powerful motors are driving the gimbal, controlled by an Alexmos stabilization board
- The motors are operating in silence fast, smoothly and precisely
- The receiver of your radio control is powered by the gimbal (no additional power supply is needed)

* The gimbal has to be adjusted so that the camera balances on it’s center of gravity. The more precisely this is done the better the Stabilizer will perform. 

Package included:

  • SteadyGim4 gimbal(Handheld)
  • Remote shutter
  • Mounting screws for the camera
  • Battery and Chargers
  • Transportation case

Note: This article doesn't include the camera shown in the above pictures. 

 

General questions

Q:What is BeStableCam for?

A:The BeStableCam developed a series gimbals for film-making professional,the SteadyGim 3-axis stabilization gimbals can be used to a wide range camera such as,Sony 5N,Panasonic GH series,Canon 5D Mark II,Mark III,Black Magic Production Cinema,Black Magic Pocket Cinema Camera,Red epic cmaera,ect,giving you smoothly,stable handheld footage  in most conditions.SteadyGim gimbals also available for aerial photography with a replace handle kits.

Q:Is it difficult to balance the gimbal and camera?

A: No,it is almost tooless to balance camera,Changing the set up for different camera is quick and simple.

Q:Does all SteadyGim gimbals already ready to work?

A:Yes,all SteadyGim gimbals are pre-assembled and balanced with the range camera after leaving our factory.Sometimes slightly adjustment is needed. 

Q:What control system does the SteadyGim gimbals use?

A:We use oringinal alexmos 32bit simple brushless gimbal control.

Q:What are the motors' noise level?

A:The SteadyGim gimbals use custom designed and developed high-torque brushless motors to maximize both gripping power and control accuracy, enabling it to support heavier cameras and high wind conditions.

Q:What are the motors' noise level?

A:The SteadyGim gimbals use custom designed and developed high-torque brushless motors to maximize both gripping power and control accuracy, enabling it to support heavier cameras and high wind conditions.

Q:When do I need to rebalance the gimbal for differnt cameras and lenses?

A:In general if you are making lens changes with 100g difference you will only need to unlock your rig and realign its CG (center of gravity) with the gimbal's CG (the projected intersection point where the roll-axis motor shaft and tilt-axis motor shaft meet.

If you are making more major changes in cameras and lenses, we will provide software and instructions for you to adjust PID settings via your lap top to balance your SteadyGim gombal. In preparing for a shoot using multiple cameras and lenses, it's best to determine and jot down corresponding PID settings for different camera and lens combinations so you don't have to rush these procedures on a set.

Q: How can I power my gimbal.

A: 3S is recommended, but 4s will also work. 

Q: Can I power it on with no camera mounted.

A: You can, but it's not recommended. It won't level out, since it's too much out of balance.

Q: Should I balance it, with the camera installed?

A: It is fairly well balanced leaving the factory, but pay attention and make adjustments if needed. When you use different camera lens,slightly adjustment is needed.


 

Opinión de Cliente
Pay with PayPalPay with VisaPay with Visa ElectronPay with MastercardPay with American ExpressPay with Maestro