SLIDE KAMERA X-SLIDER 800 Standard - carril de 800mm , opción motor, tracking manual y wireless
- 800mm rail
- AF-8 port
- AF-14 Standard Feet
- Cart with a 3/8 " threaded hole and a standard level
- AF-11SL reduction 1/4 "- 3/8" mandrel
- AF-12SL reduction 3/8 " mandrel
- Standstill brake
- Hex key
- User manual
The cart is equipped with a 3/8” threaded hole appropriate for screwing AF-12SL reduction 3/8” mandrel or alternatively AF-11SL 1/4" - 3/8" mandrel in order to mount a camera head, camcorder or a camera. There are eight M4 threaded holes on the plate of the cart to mount Slide Kamera AKC-3 adapter or any other Manfrotto adapter.
Depending on the model, the rail has mounting plates (AF-8) with 3/8" and 1/4" threaded holes which allow to mount the Slide Kamera:
- directly - on the tripod or camera head
- indirectly - by using Slide Kamera AKC-3 adapter or any other Manfrotto adapter
Adjustable folding feet allow to level the device. Rubber ends of feet provide stability of the Slide Kamera during filming from the ground.
- Length: 800mm
- Weight: 4kg
- Max load: 15kg
- Quantity of AF-8 3/8" and 1/4" lower ports: 2
- Type of side feet: AF-14 Standard
- Standstill brake: included
SMART EYE - Manual Tracking System
SMART EYE allows for automatic continuous tracking of the object by the camera/photocamera during the movement of the cart.
Thanks to the SMART EYE the object that is being filmed remains all the time in the centre of the frame.
Only available for length: X SLIDER 80cm and X SLIDER 100cm
X MOTOR 40 for TRAVIGO - SET SPECIFICATION
A set of drive heads consists of two drive heads, one head per side of the slider. The heads are equipped
with power transmission elements and a toothed belt connecting the slider cart and the driving motor.
The drive heads do not shorten the working range of the cart.
First drive head is equipped with 1/4 " and 3/8" holes with hardened inserts for attaching accessories.
X MOTOR 40 driving motor consists of a worm gear and a housing equipped with a number of sockets:
- RJ 45 socket (2 pcs) for communication between the controller and the motor, also for connecting SLIDELINK Wi-Fi Adapter with other drives
- DC power socket (2 pcs) to connect power source
- 2,5mm Trigger jack to connect the shutter release cable
Second drive head is used for mounting X MOTOR 40 (motor + drive unit) using a hinge clamp.
Single knob connection of the belt and the cart allows to easily disconnect the drive and move the cart
|Supply voltage:||10..18V DC|
|Slider cart payload:||Maximum payload for horizontal track: 4,5kg
Maximum payload for vertical track: 4kg
Continuous horizontal track: max 1A @ 12V
|Operating time with battery 12V 7Ah
(room temperature, horizontal track):
maximum 50mm/s - in VIDEO program
|Operating temperature range:||-10°C..70°C|
Shutter release cable (one to choose):
WS-1, WS-2, WS-3, WS-4, WS-5, WS-6, WS-7, WS-8, WS-9
(shutter release cables used in ANIMATION, TIMELAPSE programs)
SLIDELINK Wi-Fi Adapter
The SLIDELINK Wi-Fi Adapter enables the remote control of the devices of the Slidekamera™ system via the Slideye™PRO Application (available mainly for Android tablets) and Slidekamera™ drivers, equipped with Wi-Fi connection.
A single SLIDELINK Wi-Fi is sufficient for controlling the whole system, regardless of the number of devices. In order to increase the freedom of movement of the system it is possible to use a bigger number of adapters.Wireless communication for Slideye PRO Application for Android tablets